Tag Archives: HDMI

Blackmagic Hyperdeck Shuttle

Shuttle2

When Blackmagic originally brought out the Shuttle, it seemed like a great product if you wanted high quality uncompressed video. But that came with the downside of massive disk space requirements.

Version 2 was then released which allowed recording in either ProRes or Avid compressed formats. Brilliant. And a great price.

Now it accepts SSDs formatted in ex-FAT format too, so no need for nasty Mac-emulations on the PC.

So I finally bought one, to record 1080p output from my Red Epic and Sony Z1 cameras.

Connecting it to the computer

It comes with a DVD with software and manuals for every Blackmagic product! I read the Hyperdeck Shuttle manual and installed the software.

The Shuttle has a mini-USB socket to connect it to a computer. I did this and then ran the Hyperdeck software.

This is where I had my first major problem:

Hyperdeck-software

The software did not recognise that the Shuttle was connected. Eventually I realised that one of the grey buttons was actually an On/Off button! Turning it on helps. LOL.

I could then set the recording format to “Avid DNxHD QuickTime”.

Connecting it to a camera

The built-in battery only lasts for about an hour. Not much use if you are recording 2 hour concerts as I frequently do. So the first thing I needed to get was a cable to connect the Shuttle to one of my V-lock batteries. I spent ages reading through the Blackmagic website and on forums with no definitive advice. Then eventually I was given a link to the perfect cable on eBay. And only about £12. http://www.ebay.co.uk/itm/251192565581?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 (Note: it does come with a mains adapter, but I prefer to move about on battery power when I can).

The next cable needed was an SDI to Blackmagic mini-SDI. Well I already had a Red mini-SDI to SDI cable, so I thought I would be OK. But no, both the output of the Epic and the input for the cable are male plugs. So I’ll need another cable. I’ll update this page when I find the right one.

In the meantime I will use the HDMI connections on both devices. I have loads of HDMI cables!

The next problem is that the indicator LED for the video signal did not light up. But there was definitely a video signal coming through the cable (I tested by plugging into the TV).

After a lengthy phone conversation with Blackmagic support, we established that the LED lights up when you have a 720p signal at any frame rate. But that it only lights up for 1080p if the refresh rate is 25Hz (irrespective of the frame rate). This is just wierd as the UK and Europe run on 50Hz. I shall investigate further with other users.

Advertisements